Product Description

• Clean drying and non-staining for less mess.
• Water based and water washable.
• Good friction reducing properties.
• Applies easily by pumping.
• Low solids will not cement-in cables.
• Evaporates after use. Nothing to soil hands or pollute environment.
• Temperature stable. No waste due to phase separation.
• Compatible with most cables, including polyethylene jackets.
• Proven effectiveness through decades of worldwide use.

Product Specification

• Lubricity: PVC- or LDPE-jacketed cable on PVC conduit at 200 lbs/ft normal pressure; coefficient of dynamic friction less than 0.20.
• Temperature stability: No more than a 10% change in Brookfield viscosity from 5°C to 38°C (40°F to 100°F). No phase-out after five freeze/thaw cycles or 24-hour exposure at 49°C (120°F).
• Appearance: Thick, clear, colorless, gel material.
• pH: 6.4 to 7.2
• Wax, grease, and silicone content: None
• Cable compatibility: Passes IEEE 1210 physical and electrical testing on a wide variety of cable materials.
• Temperature Use Range: -5°C to 33°C (20°F to 90°F).
• Percent non-volatile solids: .5 to 1.5%
• Polyethylene stress cracking: No stress cracking on LDPE cable jacket when tested by ASTM D1693.
• Toxicity: Non-toxic and non-sensitizing. Industrial use only.
• Flammability: Lubricant has no flash point and dried residue is non-flammable.
• Cleanup: Complete cleanup possible with water.