Earthing Rod

Strain Clamp
May 28, 2021
Heavy Duty Aluminium Cable Link
May 29, 2021

Earthing Rod

Product Description


SUBSTATION copper bond Earthing Rod is made from high tensile - low carbon steel core with molecularly bond by 99.99% pure electrolytic copper. Both ends are threaded. The choice of materials used to manufacture an earthing rod will determine the life and performance of the grounding system. The materials which SUBSTATION utilizes will provide rugged mechanical strength, high conductivity and excellent corrosion resistance.

Rugged mechanical strength is one of the most important features of an earthing rod for easy driving into hard solid ground with minimum effort and to prevent rod damage.



Technical Detail Specification


The following are feature and standard found in SUBSTATION earthing rod:

  • SUBSTATION Earthing Rod is made from high tensile - low carbon grade steel core.
  • Electroplated with 99.99% pure electrolytic copper and molecularly bonded. - Coating thickness of 254μm.
  • No separation of copper bonding from the low carbon steel rod when observe from the fracture end of the earthing rod (i.e. good bonding between copper coated and steel rod)
  • No crack will appear when the copper electroplated steel rod are permanently bend.
  • Tested to the IEC Standard - 62561-2 Lightning Protection System Component (LPSC).*
  • EARTHING ROD

    Item CodeSize (Nominal Diameter x Length)Brand
    DSSB-EA-CURD11200SS * 1" X 1200mm Substation
    DSSB-EA-CURD11500SS * 1" X 1500mm Substation
    DSSB-EA-CURD11800SS * 1" X 1800mm Substation
    DSSB-EA-CURD341200SS 3/4" X 1200mm Substation
    DSSB-EA-CURD341500SS 3/4" X 1500mm Substation
    DSSB-EA-CURD341800SS 3/4" X 1800mm Substation
    DSSB-EA-CURD581200SS 5/8" X 1200mm Substation
    DSSB-EA-CURD581500SS 5/8" X 1500mm Substation
    DSSB-EA-CURD581800SS 5/8" X 1800mm Substation
     
    简体中文EnglishFilipinoFrançaisहिन्दीBahasa IndonesiaBahasa Melayuไทย