Legend™ 2 Part Labels (Laser Printing)

Product Description

OVERVIEW

The key benefit of the 2-part system is that the wire ID can be changed even after termination without cutting off the wire.

The system consists of a clear plastic tubing with 2 recesses; one for the label and one for the wire. The label recess remains same size. The wire recess changes according to diameter of wire to be marked . Diameter range: 1.2mm to 14mm. There are 3 different label lengths: 20mm, 30mm and 50mm with matching lengths of clear tubing.

The flexible polypropylene label has a special ‘bottle’ shape allowing it to be pulled into the clear tubing, this style makes it quick and easy to ‘load/unload’ label.

Typical uses include; sub-stations, control rooms or any application where the ID is likely to need frequent changes.

COLOUR OPTIONS

White.

Also, consider colour laser printer in conjunction with Advanced/Professional levels of software for producing colour font/background or Resistor Colour-Coding.

TESTING

This label has been tested for High/Low Temperature and Salt Mist Spray according to Lloyds Register Type Approval System.

Test	Method
Moisture Resistance	MIL-STD-202G Method 106G
Moisture Resistance	MIL-STD-202G Method 106G
Low Temperature 72 hours @ -40°C	MIL-STD-810F Method 502.4
High Temperature 500 hours @ 70°C	MIL-STD-202G Method 108A
Hydrogen Sulphide	H2S Sour Gas Exposure (2% H2S)
UV Weathering 500 hours*	ISO 4982 Part 3 Method A Cycle 1
Salt Mist Spray	IEC60068-2-52 Test Kb Salt Mist (Cyclic)

* Limited external applications generally away from direct sunlight but may be suitable in control boxes etc. Labels generally for internal use such as, control rooms, power stations, substations etc.

PRINTING

Print using ordinary office laser printer or colour laser for colour options.